manualshive.com logo in svg

Canon Powershot SX520 HS, User Manual

Share
Download
Canon Powershot SX520 HS User Manual Download Page 314

314

ç

 Contents

Trademarks and Licensing

 

●

Microsoft and Windows are trademarks or registered 
trademarks of Microsoft Corporation in the United States and/
or other countries.

 

●

Macintosh and Mac OS are trademarks of Apple Inc., 
registered in the U.S. and other countries.

 

●

The SDXC logo is a trademark of SD-3C, LLC.

 

●

HDMI, the HDMI logo and High-Definition Multimedia Interface 

are trademarks or registered trademarks of HDMI Licensing, 
LLC.

 

●

All other trademarks are the property of their respective 
owners.

 

●

This device incorporates exFAT technology licensed from 
Microsoft.

 

●

This product is licensed under AT&T patents for the MPEG-4 
standard and may be used for encoding MPEG-4 compliant 
video and/or decoding MPEG-4 compliant video that was 
encoded only (1) for a personal and non-commercial purpose 
or (2) by a video provider licensed under the AT&T patents 
to provide MPEG-4 compliant video. No license is granted or 
implied for any other use for MPEG-4 standard.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands