Canon Powershot SX520 HS User Manual Download Page 180

Page: 180 / 315

180

Contents

Choosing Images Individually

Choose [Select].

●

Following step 2 in “Using the
Menu” (

179), choose [Select]

and press the [

] button.

Choose an image.

●

Press the [ ][ ] buttons to
choose an image, and then press
the [

] button. [

] is displayed.

●

To cancel selection, press the [

]

button again. [

] is no longer

displayed.

●

Repeat this process to specify
other images.

Protect the image.

●

Press the [

] button.

A confirmation message is

displayed.

●

Press the [ ][ ] buttons to
choose [OK], and then press the
[

] button.

●

Images will not be protected if you switch to Shooting mode or

turn the camera off before finishing the setup process in step 3.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands