Canon Powershot SX520 HS User Manual Download Page 173

Page: 173 / 315

173

Contents

Image Viewing Options

Magnifying Images

Still Images

Movies

Magnify an image.

●

Moving the zoom lever toward
[

] will zoom in and magnify the

image, and [

] is displayed.

You can magnify images up to
about 10x by continuing to hold
the zoom lever.

●

The approximate position of the
displayed area (1) is shown for
reference.

●

To zoom out, move the zoom
lever toward [

]. You can

return to single-image display by
continuing to hold it.

Move the display position

and switch images as

needed.

●

To move the display position,
press the [

][

][ ][ ] buttons.

(1)

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands