Canon Powershot SX520 HS User Manual Download Page 145

Page: 145 / 315

145

Contents

Shooting with the AF Lock

Still Images

Movies

The focus can be locked. After you lock the focus, the focal

position will not change even when you release your finger from

the shutter button.

Lock the focus.

●

With the shutter button pressed
halfway, press the [ ] button.

●

The focus is now locked, and
[

] and the MF indicator are

displayed.

●

To unlock the focus, hold the
shutter button halfway down and
press the [ ] button again.

Compose the shot and shoot.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands