Canon Powershot SX520 HS User Manual Download Page 115

Page: 115 / 315

115

Contents

Using the Wink Self-Timer

Still Images

Movies

Aim the camera at a person and press the shutter button all the
way down. The camera will shoot about two seconds after a wink
is detected.

Choose [ ].

●

Follow steps 1 – 2 in “Specific

Scenes” (

104) and choose

[

], and then press the [

]

button.

●

Press the [ ][ ] buttons to
choose [

], and then press the

[

] button.

Compose the shot and press

the shutter button halfway.

●

Make sure a green frame is
displayed around the face of the
person who will wink.

Press the shutter button all

the way down.

●

The camera now enters shooting
standby mode, and [Wink to take
picture] is displayed.

●

The lamp blinks and the self-timer
sound is played.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands