manualshive.com logo in svg

Canon Powershot SX520 HS, User Manual

Share
Download
Canon Powershot SX520 HS User Manual Download Page 108

108

ç

 Contents

Shots Resembling Miniature Models 

(Miniature Effect)

 Still Images 

 Movies

Creates the effect of a miniature model, by blurring image areas 
above and below your selected area.
You can also make movies that look like scenes in miniature 
models by choosing the playback speed before the movie is 
recorded. People and objects in the scene will move quickly during 
playback. Note that sound is not recorded.

1 

Choose [ ].

 

●

Follow steps 1 – 2 in “Image 
Effects (Creative Filters)” 
(

=

 106) and choose [

].

 

●

A white frame is displayed, 
indicating the image area that will 
not be blurred.

2 

Choose the area to keep in 

focus.

 

●

Press the [

] button.

 

●

Move the zoom lever to resize 
the frame, and press the [

][

] 

buttons to move it.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands