Canon PowerShot SX500 IS User Manual Download

Page: 94 / 228

Image Brightness (Exposure Compensation)

Still Images

Locking Image Brightness/Exposure (AE Lock)

Before shooting, you can lock the exposure, or you can specify focus and

exposure separately.

Lock the exposure.

Aim the camera at the subject to shoot

with the exposure locked. With the

shutter button pressed halfway, press the

> button.

[ ] is displayed, and the exposure is

locked.

To unlock AE, release the shutter button

and press the <

> button again. In this

case, [ ] is no longer displayed.

Compose the shot and shoot.

After one shot, AE is unlocked and [ ] is

no longer displayed.

•

AE: Auto Exposure

•

After the exposure is locked, you can adjust the combination of shutter

speed and aperture value by turning the <

> dial (Program Shift).

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands