Canon PowerShot SX500 IS User Manual Download

Page: 89 / 228

Shooting Various Movies

Movies

Locking or Changing Image Brightness Before Shooting

Before shooting, you can lock the exposure or change it in 1/3-stop

increments within a range of –2 to +2.

Lock the exposure.

Press the <

> button to lock the exposure.

The exposure shift bar is displayed.

To unlock the exposure, press the <

button again.

Adjust the exposure.

Turn the <

> dial to adjust the

exposure, as you watch the screen.

Shoot (

88).

Movies

Shooting iFrame Movies

Shoot movies that can be edited with iFrame-compatible software or

devices. You can quickly edit, save, and manage iFrame movies using the

included software (

31).

Choose [ ].

Set the mode dial to <

Press the <

> button, choose [

]

in the menu, and then choose [ ]

(

46).

Black bars displayed on the top and

bottom edges of the screen indicate

image areas not recorded.

Shoot (

88).

•

The resolution is [

] (

70) and cannot be changed.

•

iFrame is a video format developed by Apple.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands