Canon PowerShot SX500 IS User Manual Download

Page: 42 / 228

On/Off

Shooting Mode

Press the power button to turn the

camera on and prepare for shooting.

To turn the camera off, press the power

button again.

Playback Mode

Press the <

> button to turn the camera

on and view your shots.

To turn the camera off, press the <

button again.

•

To switch to Playback mode from Shooting mode, press the <

> button.

•

To switch to Shooting mode from Playback mode, press the shutter button

halfway (

43).

•

The lens will be retracted after about one minute once the camera is in

Playback mode. You can turn the camera off when the lens is retracted by

pressing the <

> button.

Power-Saving Features (Auto Power Down)

As a way to conserve battery power, the camera automatically deactivates

the screen (Display Off) and then turns itself off after a specific period of

inactivity.

Power Saving in Shooting Mode

The screen is automatically deactivated after about one minute of inactivity.

In about two more minutes, the lens is retracted and the camera turns itself

off. To activate the screen and prepare for shooting when the screen is off

but the lens is still out, press the shutter button halfway (

43).

Power Saving in Playback Mode

The camera turns itself off automatically after about five minutes of

inactivity.

•

Adjust the timing of automatic camera and screen deactivation as needed

(

163).

•

Power saving is not active while the camera is connected to a computer

(

36).

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands