Canon PowerShot SX500 IS User Manual Download

Page: 22 / 228

Initial Preparations

Remove the memory card.

Push the memory card in until it clicks,

and then slowly release it.

The memory card will pop up.

Setting the Date and Time

Set the current date and time correctly as follows if the [Date/Time] screen

is displayed when you turn the camera on. Information you specify this way

is recorded in image properties when you shoot, and it is used when you

manage images by shooting date or print images showing the date.

You can also add a date stamp to shots, if you wish (

65).

Turn the camera on.

Press the power button.

The [Date/Time] screen is displayed.

Set the date and time.

Press the <

> buttons to choose an

option.

Press the <

> buttons or turn the

> dial to specify the date and time.

When finished, press the <

> button.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands