Canon PowerShot SX500 IS User Manual Download Page 171

Page: 171 / 228

171

Optional Accessories

The following camera accessories are sold separately. Note that availability

varies by area, and some accessories may no longer be available.

Power Supplies

Battery Pack NB-6L

Rechargeable lithium-ion battery

Battery Charger CB-2LY/CB-2LYE

Charger for Battery Pack NB-6L

AC Adapter Kit ACK-DC40

For powering the camera using

household power. Recommended when

using the camera over extended periods,

or when connecting the camera to a

printer or computer. Cannot be used to

charge the camera battery.

•

The battery charger and AC adapter kit can be used in areas with

100 – 240 V AC power (50/60 Hz).

•

For power outlets in a different format, use a commercially

available adapter for the plug. Never use an electrical transformer

designed for traveling, which may damage the battery.

Flash Unit

High-Power Flash HF-DC2

External flash for illuminating subjects

that are out of range of the built-in flash.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands