Canon PowerShot SX500 IS User Manual Download

Page: 109 / 228

109

Shooting Range and Focusing

Still Images

Shooting with Servo AF

This mode helps avoid missing shots of subjects in motion, because the

camera continues to focus on the subject and adjust the exposure as long

as you press the shutter button halfway.

Configure the setting.

Press the <

> button, choose

[Servo AF] on the [

] tab, and then

choose [On] (

47).

Focus.

The focus and exposure are maintained

where the blue AF frame is displayed

while you are pressing the shutter button

halfway.

•

Focusing may not be possible in some shooting conditions.

•

In low-light conditions, Servo AF may not be activated (AF frames

may not turn blue) when you press the shutter button halfway.

In this case, the focus and exposure are set according to the

specified AF frame mode.

•

If adequate exposure cannot be obtained, shutter speeds and

aperture values are displayed in orange. Release the shutter

button, and then press it halfway again.

•

AF lock shooting is not available.

•

[AF-Point Zoom] on the [

] tab is not available.

•

Not available when using the self-timer (

62).

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands