Canon PowerShot SX500 IS User Manual Download

Page: 102 / 228

102

Color and Continuous Shooting

Still Images

Continuous Shooting

Hold the shutter button all the way down to shoot continuously.

For details on the continuous shooting speed, see “Specifications” (

217).

Configure the setting.

Press the <

> button, choose [ ] in

the menu, and choose the desired option

(

46).

The option you configured is now

displayed.

Shoot.

Hold the shutter button all the way down

to shoot continuously.

Mode

Description

Continuous

Continuous shooting, with the focus and exposure determined

when you press the shutter button halfway.

Continuous

Shooting AF

Continuous shooting and focusing.

[AF Frame] is set to [Center] and cannot be changed.

Continuous

Shooting LV*

Continuous shooting, with the focus fixed at the position determined

in manual focusing. In [

] mode, focus is determined by the first shot.

* In [

] mode (

81), AF lock (

110), or manual focus mode (

103), [

] is

changed to [

* For details on the continuous shooting speed in each mode, see, “Specifications”

(

217).

•

Cannot be used with the self-timer (

62) or [Blink Detection]

(

74).

•

Shooting may stop momentarily or continuous shooting may slow

down depending on shooting conditions, camera settings, and the

zoom position.

•

As more shots are taken, shooting may slow down.

•

Shooting may slow down if the flash fires.

•

Continuous shooting is faster in [

] mode (

80).

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands