Canon PowerShot SX500 IS User Manual Download

Page: 100 / 228

100

Color and Continuous Shooting

Still Images

Movies

Changing Image Color Tones (My Colors)

Change image color tones as desired, such as converting images to sepia

or black and white.

Press the <

> button, choose [ ] in

the menu, and choose the desired option

(

46).

The option you configured is now

displayed.

My Colors Off

–

Vivid

Emphasizes contrast and color saturation, making images

sharper.

Neutral

Tones down contrast and color saturation for subdued

images.

Sepia

Creates sepia tone images.

B/W

Creates black and white images.

Positive Film

Combines the effects of Vivid Blue, Vivid Green, and

Vivid Red to produce intense yet natural-looking colors

resembling images on positive film.

Lighter Skin Tone

Lightens skin tones.

Darker Skin Tone

Darkens skin tones.

Vivid Blue

Emphasizes blues in images. Makes the sky, ocean, and

other blue subjects more vivid.

Vivid Green

Emphasizes greens in images. Makes mountains, foliage,

and other green subjects more vivid.

Vivid Red

Emphasizes reds in images. Makes red subjects more

vivid.

Custom Color

Adjust contrast, sharpness, color saturation, and other

qualities as desired (

101).

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands