Adding Effects and Shooting (Creative Filters)
68
Specify the color.
z
Position the center frame so it is filled with
the color you want and press the
q
button.
X
The specified color will be recorded.
Specify the range of colors.
z
Press the
op
buttons or turn the
5
dial
to change the range of colors to be
retained.
z
Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z
Press the
l
button to complete the
setting and restore the shooting screen.
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose
Y
.
z
Follow Steps 1 – 2 on p. 64 to choose
Y
.
Press the
l
button.
X
The unchanged image and the Color Swap
image will alternately display.
X
The default setting is to change green to
gray.
Recorded color
•
Using the flash may cause unexpected results in this mode.
•
Depending on shooting conditions, the image may become coarse, or the
colors may not come out as expected.
Shooting with Color Swap
COP
Y
Summary of Contents for Powershot SX40 HS
Page 12: ...12 COPY...
Page 144: ...144 COPY...
