Changing Shooting Function Settings
162
Registering Functions to the
Button
●
Choose [Set Shortcut button], then press
the
m
button.
●
Press the
opqr
buttons or turn the
Â
dial to choose the functions to register,
then press the
m
button.
●
Pressing the
button will call up the
registered function.
•
If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
•
When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
When shooting movies, if you press the zoom lever toward
j
and zoom
out, the effect increases.
•
Choose
if you want to return the button to default settings.
•
When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current Shooting mode or function setting.
•
In
, each press of the
button records white balance data (p. 77),
and the white balance settings change to
.
•
In
%
, each press of the
button will adjust and lock the focus, and
%
will appear on the screen.
•
If you press the
button in
, both the screen and viewfinder
displays will turn off. Try one of the following to restore the displays:
•
Press any button other than the power button
•
Change the camera’s vertical or horizontal orientation
•
Open and close the screen
•
Raise and lower the flash
COP
Y
