Canon PowerShot SX230 HS, User Manual

Page: 88 / 212

88
You can change the tone of an image, for example to sepia or black and
white, when shooting.
Choose My Colors.
z
After pressing the
m
button, press the
op
buttons or turn the
Â
dial to choose
, then press the
m
button again.
Choose an option.
z
Press the
op
buttons or turn the
Â
dial
to choose an option, then press the m
button.
X The setting will appear on the screen.
Changing the Tone of an Image (My Colors)
My Colors Off —
Vivid
Emphasizes the contrast and color saturation for a vivid
impression.
Neutral
Tones down the contrast and color saturation for neutral
hues.
Sepia Changes the image to sepia tones.
B/W Changes the image to black and white.
Positive Film
Combines the effects of Vivid Blue, Vivid Green and Vivid
Red to produce intense natural appearing colors like those
obtained with positive film.
Lighter Skin Tone Makes skin tones lighter.
Darker Skin Tone Makes skin tones darker.
Vivid Blue
Emphasizes blue tints. Makes the sky, ocean and other
blue subjects more vivid.
Vivid Green
Emphasizes green tints. Makes mountains, foliage and
other green subjects more vivid.
Vivid Red Emphasizes red tints. Makes red subjects more vivid.
Custom Color
You can adjust contrast, sharpness, and color saturation
etc. to your preference (p. 89).
• The white balance cannot be set in and (p. 83).
• In and , colors other than people’s skin color may change. You
may not obtain the expected results with some skin colors.
COP
Y