Canon PowerShot SX200 IS User Manual Download

Page: 32 / 179

Shooting Movies

Shoot.

●

Press the shutter button fully.

The camera will start shooting the movie,
and [ Rec] and the elapsed time will
appear on the screen.

●

Once shooting begins, take your finger off
the shutter button.

●

If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.

●

Do not touch the microphone while
shooting.

●

Do not press any buttons other than the
shutter button. Otherwise, the sound the
buttons make will be recorded in the
movie.

Stop shooting.

●

Press the shutter button fully again.

The camera will beep once and stop
shooting the movie.

The indicator will blink green, and the
movie will record to the memory card.

Shooting will automatically stop when the
memory card fills.

Estimated Shooting Times

•

Shooting times are based on default settings.

•

Shooting time can be checked on the screen in Step 2.

•

Max. clip length is approx. 29 minutes and 59 seconds.
Recording also stops when the file size reaches 4 GB.

Elapsed Time

Microphone

Memory Card

2 GB

8 GB

Shooting Time

10 min. 53 sec.

43 min. 32 sec.

(EC260) CDI-E403_Guide_E.book Page 32 Thursday, December 18, 2008 2:02 PM

Summary of Contents for PowerShot SX200 IS




















































































































































































Search results

Summary of Contents for PowerShot SX200 IS

Reviews:

Related manuals for PowerShot SX200 IS

Brands by name

Popular brands

Canon PowerShot SX200 IS, User Manual

Search results

Summary of Contents for PowerShot SX200 IS

Reviews:

Related manuals for PowerShot SX200 IS

Brands by name

Popular brands