Canon PowerShot SX160 IS, User Manual

Page: 139 / 214

139
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1
Choose [ * ].
z z Following steps 1 – 5 on = 110 – 111,
choose [ * ] and press the < m > button.
X X The movie editing panel and editing bar
are now displayed.
Movie Editing Panel
Movie Editing Bar
2
Specify portions to cut.
z z Press the < o >< p > buttons to choose
[ ] or [ ].
z z To view the portions you can cut
(identified by [ ] on the screen), press
the < q >< r > buttons or turn the < 5 >
dial to move [ ]. Cut the beginning of the
movie (from [ ]) by choosing [ ], and
cut the end of the movie by choosing
[ ].
z z Even if you move [ ] to a position other
than a [ ] mark, choosing [ ] will only
cut the portion from the nearest [ ] to
the left, and choosing [ ] will cut the
portion from the nearest [ ] to the right.
3
Review the edited movie.
z z Press the < o >< p > buttons to choose
[ ], and then press the <
m
> button.
The edited movie is now played.
z z
To edit the movie again, repeat step 2.
z z To cancel editing, press the < o >< p >
buttons to choose [ ]. Press the <
m
>
button, choose [OK] (either press the
< q >< r > buttons or turn the < 5 > dial),
and then press the < m > button again.
COP
Y