Canon PowerShot S90 User Manual Download Page 32

Page: 32 / 179

Shooting Movies

Shoot.

●

Press the shutter button fully.

The camera will start shooting the movie,
and [ Rec] and the elapsed time will
appear on the screen.

●

Once shooting begins, take your finger off
the shutter button.

●

If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.

●

You can also zoom in and out with the
zoom lever during shooting. However, you
cannot use the

ring to zoom.

●

Do not touch the microphone while shooting.

●

Operational sounds will be recorded in the
movie.

Stop shooting.

●

Press the shutter button fully again.

The camera will beep once and stop
shooting the movie.

The indicator will blink green, and the
movie will record to the memory card.

Shooting will automatically stop when the
memory card fills.

Estimated Shooting Times

•

Shooting times are based on default settings.

•

Recording will automatically stop when either the clip file size reaches 4 GB or
the recording time reaches approximately 1 hour.

•

Recording may stop even if the maximum clip length has not been reached on
some memory cards. SD Speed Class 4 or higher memory cards are
recommended.

Elapsed Time

Microphone

Memory Card

2 GB

8 GB

Shooting Time

23 min. 49 sec.

1 hr. 35 min. 11 sec.

Summary of Contents for PowerShot S90




















































































































































































Search results

Summary of Contents for PowerShot S90

Reviews:

Canon PowerShot S90, User Manual, Page: 32 / 179

Search results

Summary of Contents for PowerShot S90

Reviews: