Canon PowerShot S90 Page 14 User Manual Download

Page: 14 / 179

Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.

Remove the cover.

Insert the battery.

●

Align the

marks on the battery and

charger, then insert the battery by sliding it
in

and down

Charge the battery.

●

For CB-2LY:

Flip out the plug

and plug

the charger into a power outlet

●

For CB-2LYE:

Plug the power cord into

the charger, then plug the other end into a
power outlet.

The charge lamp lights red and charging
starts.

●

The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.

Remove the battery.

●

Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in

and up

Charging the Battery

CB-2LY

CB-2LYE

To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.

Summary of Contents for PowerShot S90




















































































































































































Search results

Summary of Contents for PowerShot S90

Reviews:

Related manuals for PowerShot S90

Brands by name

Popular brands

Canon PowerShot S90, User Manual

Search results

Summary of Contents for PowerShot S90

Reviews:

Related manuals for PowerShot S90

Brands by name

Popular brands