Canon PowerShot S300 Digital Elph User Manual Download Page 119

Page: 119 / 193

Cannot Install the Printer Driver

119

Troubleshooting

Cannot Install the Printer Driver

■

Follow the installation procedure correctly.

Install the printer driver carefully following the procedures described in the

Quick Start

Guide.

If the printer driver was not installed correctly, reinstall it. If you are using Windows,
delete the printer driver before reinstalling it.

➡

Uninstalling Printer Drivers

Note

➤

If the Installer was forcibly terminated due to an error in Windows, Windows
may be unstable and this will prevent the printer driver from being installed.
Restart the computer before reinstalling the printer driver.

■

Close any other applications before installation.

Sometimes the printer driver cannot be installed because another application is running.

Summary of Contents for PowerShot S300 Digital Elph


































































































































































































Search results

Summary of Contents for PowerShot S300 Digital Elph

Reviews:

Canon PowerShot S300 Digital Elph, User Manual, Page: 119 / 193

Search results

Summary of Contents for PowerShot S300 Digital Elph

Reviews: