Canon PowerShot S300 Digital Elph Page 11 User Manual Download

Page: 11 / 193

Safety Precautions

Caution

➤

You may cause injury or damage the printer if you ignore any of these
safety precautions.

■

Choosing a location

Do not install the printer in a location that is unstable or subject to excessive vibration.

Do not install the printer in locations that are very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.

To avoid the risk of fire or electric shocks, install the printer in a location with an ambient temperature range
of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).

Do not place the printer on a thick rug or carpet.

Ensure that the area around the power outlet is kept clear at all times
so you can easily unplug the power cord if necessary.

When moving the printer, carry the printer at both ends.

Summary of Contents for PowerShot S300 Digital Elph


































































































































































































Search results

Summary of Contents for PowerShot S300 Digital Elph

Reviews:

Related manuals for PowerShot S300 Digital Elph

Brands by name

Popular brands

Canon PowerShot S300 Digital Elph, User Manual

Search results

Summary of Contents for PowerShot S300 Digital Elph

Reviews:

Related manuals for PowerShot S300 Digital Elph

Brands by name

Popular brands