Canon PowerShot S1OO Getting Started Download Page 167

Page: 167 / 278

AE Lock/Exposure Shift

132

Frame Rates and Playback Times (for 30 Sec. Clips)

You can lock the exposure or change it in 1/3 steps within a range of –2 to +2
before shooting.

Lock the exposure.

Press the

button to lock the exposure.

The exposure shift bar appears.

Press the

button again to release the

lock.

Change the exposure.

While watching the screen, turn the

dial

to adjust the exposure.

Shoot.

Frame Rate

Playback Time

240 fps

Approx. 4 min.

120 fps

Approx. 2 min.

Viewing super slow motion movies

•

The movie will play back in slow motion when you follow Steps 1 – 3 on p. 32.

•

You can use the included software to change the playback speed of movies shot
in

mode. Refer to the

Software Guide

for details.

•

The recording pixel setting will be fixed at

(320 x 240 pixels) when

shooting in

, and

(640 x 120 pixels) when shooting in

•

Even if you move the zoom lever, the zoom will not operate while
shooting.

•

The focus, exposure and white balance will be set when the movie button
is pressed.

AE Lock/Exposure Shift

COP

Summary of Contents for PowerShot S1OO























































































































































































































































































Search results

Summary of Contents for PowerShot S1OO

Reviews:

Brands by name

Popular brands

Canon PowerShot S1OO, Getting Started

Search results

Summary of Contents for PowerShot S1OO

Reviews:

Brands by name

Popular brands