Canon PowerShot S110 Digital ELPH User Manual Download Page 199

Page: 199 / 346

199

Other Settings

Still Images

Changing the Compression Ratio (Image

Quality)

Choose from two compression ratios, as follows: [ ] (Super Fine),

[ ] (Fine). For guidelines on how many shots at each compression ratio

can fit on a memory card, see “Specifications” (

333).

Configure the setting.

Press the <

> button, choose [ ] in

the menu, press the <

> button,

and choose the desired option (

89).

Still Images

Movies

Changing the IS Mode Settings

Configure the setting.

Press the <

> button, choose [IS

Mode] on the [

] tab, and then choose

the desired option (

91).

Continuous

Optimal image stabilization for the

shooting conditions is automatically

applied (Intelligent IS) (

103).

Shoot

Only

Image stabilization is active only at

the moment of shooting.

Off

Deactivates image stabilization.

* The setting is changed to [Continuous] for movie

recording.

•

If image stabilization cannot prevent camera shake, mount the

camera on a tripod or take other measures to hold it still. In this

case, set [IS Mode] to [Off].

COP

Summary of Contents for PowerShot S110 Digital ELPH



























































































































































































































































































































































Search results

Summary of Contents for PowerShot S110 Digital ELPH

Reviews:

Related manuals for PowerShot S110 Digital ELPH

Brands by name

Popular brands

Canon PowerShot S110 Digital ELPH, User Manual

Search results

Summary of Contents for PowerShot S110 Digital ELPH

Reviews:

Related manuals for PowerShot S110 Digital ELPH

Brands by name

Popular brands