Canon PowerShot S110 Digital ELPH, User Manual

Page: 171 / 346

171
Image Brightness (Exposure Compensation)
Still Images
Auto Exposure Bracketing (AEB Mode)
Three consecutive images are captured at different exposure levels
(standard exposure, underexposure, and then overexposure) each time
you shoot. You can adjust the amount of underexposure and overexposure
(relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.
1
Choose [ ].
z z Press the < m > button, choose
[ ] in the menu, and then choose [ ]
(
=
89).
2
Configure the setting.
z z
Press the <
n
> button, and then
adjust the setting by pressing the
< q >< r > buttons or turning the < 7 > dial.
• AEB is only available in [ ! ] mode ( = 111).
• Continuous shooting ( = 179) is not available in this mode.
• If exposure compensation is already in use ( = 166), the value specified for
that function is treated as the standard exposure level for this function.
• You can also access the setting screen of step 2 by pressing the < n >
button when the exposure compensation screen ( = 166) is displayed.
• Three shots are taken, regardless of any quantity specified in [ $ ] ( = 108).
• In [Blink Detection] mode ( = 131), this function is only available for the
final shot.
• To access the setting screen in step 2, you can either touch [ ] on the screen
in step 1 or touch [ ] on the exposure compensation screen ( = 166).
• You can also configure this setting by touching or dragging the bar on the
setting screen in step 2 to specify a value and then touching [ ].
COP
Y