Canon POWERSHOT PRO 1, User Manual, Page: 77 / 210

73
S
hoot
ing
–
L
e
ttin
g
the
Ca
mera
Se
lec
t
Se
tt
ing
s
Macro Mode
Use the macro mode to shoot close-ups of subjects when the
distance from the tip of the lens to the subject is in the following
range (varies according to the zoom position):
* The zoom position appears in 35mm film equivalent values.
Mode Dial
Zoom Position (35mm film equivalent) Distance to the subject
Wide angle end – 63 mm 10 – 50 cm (3.9 in. – 1.6 ft.)
63 – 90 mm 30 – 50 cm (1.0 – 1.6 ft.)
90 mm – telephoto end Macro shooting not available
1
Press the button.
z
appears on the display panel and the
LCD monitor (or in the viewfinder).
z
Press the button again to cancel the
macro mode.
2
Shoot the image.
z
Shooting procedures are the same as for the mode (p. 53).
z When you turn the zoom ring, the zoom bar accompanied by the
yellow bar under it appears. The yellow bar shows the zoom range
in which you cannot shoot the subject in Macro mode.
If the zoom bar enters the yellow bar range, the macro mode icon
will appear in gray after the zoom bar disappears. You can still
shoot the image, however, the macro mode is canceled.
Appears in gray
Approx. 2 seconds
later
Zoom bar
Yellow bar
Downloaded From camera-usermanual.com Canon Manuals