Canon POWERSHOT PRO 1, User Manual, Page: 184 / 210

Using the Tele-converter (Sold Separately)/Close-up Lens (Sold Separately) (continued)
180
Setting the Camera Lens to the Most Appropriate
Position
1
Turn the mode lever to (Shooting) and press the
MENU button.
z The [ (Rec.)] menu appears.
2
Select [Converter] using the
S
S S
S
or
T
T T
T
arrow on the omni selector,
then select the name of the
mounted lens using the
W
W W
W
or
X
X X
X
arrow on the omni selector.
z
If you select [TC-DC58A], the zoom
moves to the telephoto end. Zoom
operation is possible, however, it is
limited to the area near the telephoto end.
z If you select [500D], the zoom will be
fixed to the telephoto end.
3
Press the MENU button.
z The icon of the selected lens in Step 2
appears on the LCD monitor (or in the
viewfinder) at the position where the
zoom magnifications usually appear.
(Zoom magnifications do not appear
when you see this icon.)
: Tele-converter
: Close-up lens
z
The [Converter] setting is stored in the
camera’s memory. Therefore, when you
turn on the camera next time, the zoom
moves to the telephoto end.
Be sure to set [Converter] to [None] after
you remove the tele-converter/close-up
lens.
Icon of the
selected lens
Downloaded From camera-usermanual.com Canon Manuals