Canon PowerShot N, User Manual

Page: 109 / 135

109
1
2
3
4
5
6
7
9
10
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Creative Shot
Mode
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
8
Advanced Guide
Setting Menu
Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
z z Touch the field to the left of [Low Level
Format] to select it (mark with a [ ]).
z z Follow steps 2 – 3 in “Formatting Memory
Cards” ( = 108) to continue with the
formatting process.
• Low-level formatting takes longer than “Formatting Memory Cards” ( = 108),
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by touching [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
Metric/Non-Metric Display
Change the unit of measurement shown in GPS information for elevation
(
=
67) and elsewhere from m/cm to ft/in as needed.
z z Choose [Units], and then choose [ft/in].
Increasing Touch-Screen Panel Sensitivity
Sensitivity of the touch-screen panel can be increased, so that the camera
responds to a lighter touch.
z z Choose [Touch Response], and then
choose [High].
Adjusting Wi-Fi Settings
The following options are available by choosing [Wi-Fi Settings] > [Mobile
Device Connect Button].
•
Change the nickname (
=
103)
•
Check the camera’s MAC address (
=
93)
•
Reset the Wi-Fi settings (
=
103)
•
Disable display of recent target devices (
=
88)
•
Remove smartphones assigned to the < > button (
=
104)
COP
Y