Canon PowerShot G7X Mark II, User Manual, Page: 447 / 539

447
ç
Contents
[ ] is displayed when the shutter button is pressed halfway
(
=
74).
● Set [IS Mode] to [Continuous] (
=
110).
● Raise the flash and set the flash mode to [ ] (
=
208).
● Increase the ISO speed (
=
169).
● Mount the camera on a tripod or take other measures to keep it still.
Additionally, you should set [IS Mode] to [Off] when using a tripod or
other means to secure the camera (
=
110).
Shots are out of focus.
● Press the shutter button halfway to focus on subjects before pressing it
all the way down to shoot (
=
50).
● Make sure subjects are within focusing range (
=
525).
● Set [AF-assist Beam] to [On] (
=
112).
● Confirm that unneeded functions such as macro are deactivated.
● Try shooting with focus lock or AF lock (
=
196,
=
207).
Shots are blurry.
● Blurring may occur more often when Touch Shutter is used to shoot,
depending on shooting conditions. Hold the camera still when shooting.
No AF frames are displayed and the camera does not focus when
the shutter button is pressed halfway.
● To have AF frames displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before
you press the shutter button halfway. Otherwise, try pressing the shutter
button halfway repeatedly.
Subjects in shots look too dark.
● Raise the flash and set the flash mode to [ ] ( = 208).
● Adjust brightness by using exposure compensation ( = 165).
● Adjust brightness by using the Auto Lighting Optimizer ( = 174).
● Use AE lock or spot metering ( = 166, = 167).