97
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Other Settings
Changing Image Quality
Still Images
Movies
Choose from 7 combinations of size (number of pixels) and compression
(image quality). Also specify whether to capture images in RAW format
98). For guidelines on how many of each kind of image can fit on a
memory card, see “Number of Shots per Memory Card” (
z
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
z
The option you configured is now
displayed.
z
To restore the original setting, repeat this
process but choose [ ].
●
[
] and [
] indicate different levels of image quality depending
on the extent of compression. At the same size (number of
pixels), [
] offers higher image quality. Although [
] images
have slightly lower image quality, more fit on a memory card. Note
that [
] is image quality of [
].
●
Not available in [
] mode.
●
You can also configure this setting by choosing MENU (
► [
1] tab ► [Image quality].
When deciding the number of pixels based on print size, use the following
table as a guide for images with a 3:2 aspect ratio.
A2 (16.5 x 23.4 in.)
A3 (11.7 x 16.5 in.)
A4 (8.3 x 11.7 in.)
3.5 x 5 in., 5 x 7 in., Postcard
Changing the Flash Timing
Still Images
Movies
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
z
Press the [
] button, choose [Flash
Settings] on the [ 5] tab, and then press
the [ ] button (
2
Configure the setting.
z
Choose [Shutter Sync.], and then choose
1st-curtain
The flash fires immediately after the shutter opens.
2nd-curtain
The flash fires immediately before the shutter closes.
