170
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
z
Choose [Electronic Level] on the [ 1] tab,
and then press the [ ] button.
z
Choose [Reset], and then press the [ ]
button.
z
Choose [OK], and then press the [ ]
button.
Start-Up Screen
Customize the start-up screen shown after you turn the camera on as
follows.
z
Choose [Start-up Image] on the [ 1] tab,
and then press the [ ] button.
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose an option.
Changing the Video System
Set the video system of any television used for display. This setting
determines the image quality (frame rate) available for movies.
z
Choose [Video system] on the [ 1] tab,
and then choose an option.
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
For greater calibration accuracy, display grid lines (
level the camera in advance.
1
Make sure the camera is level.
z
Place the camera on a flat surface, such
as a table.
2
Calibrate the electronic level.
z
Choose [Electronic Level] on the [ 1] tab,
and then press the [ ] button.
z
To adjust left/right tilt, choose [Horizontal
Roll Calibration], and to adjust forward/
backward tilt, choose [Vertical Pitch
Calibration], followed by the [ ] button. A
confirmation message is displayed.
z
Choose [OK], and then press the [ ]
button.
