Canon PowerShot G3, Error Code List, Page: 146 / 310

Chapter 2: Service Error Codes
2-86
Cause Remedy
##609 [ TX/RX ] The end of the signal for MF1 (Minifax 1)
from the other party cannot be detected
[Japanese model]
• Contact the telephone company, and ask
for maintenance of the line.
• The line suffered large noise.
Cause Remedy
##610 [ TX ] In MF1 (Minifax 1) transmission, PIS was
received [Japanese model]
• Check to see if a document longer than 630
mm in Fine mode or 420 mm in Standard
mode was transmitted.
• Replace the document edge sensor (DES).
• STOC (F-NET side) detected a fault.
• The document edge sensor (DES) is faulty.