Canon PowerShot G2, Service Manual

Page: 79 / 155

3-34
CHAPTER 3. REPAIR INSTRUCTION
Fig. 3-34 BUTTON PCB ASS’Y
2.3.3.2 BUTTON PCB ASS’Y
(1) SEL. BUTTON BASE, BUTTON PCB ASS’Y, REAR FRAME
1. Remove the two screws.
2. Remove the SEL. BUTTON BASE.
3. Remove the BUTTON PCB ASS’Y attached by both-sided tape from the REAR FRAME.
NOTE (Assembling)
Attach the both-sided tape T-4000 at the three locations as shown in the figure.
(1)-1
(1)-2
SEL. BUTTON BASE
REAR FRAME
(1)-3
BUTTON PCB ASS'Y
p
Attach the both-sided tape T-4000.
Both-sided tape
Both-sided tape
Position setting
Position setting
Position setting
NOTE (Assembling)