Canon PowerShot G2, Service Manual

Page: 57 / 155

3-12
CHAPTER 3. REPAIR INSTRUCTION
Fig. 3-12 FLASH/SPEAKER UNIT
2.2.9 FLASH/SPEAKER UNIT
(1) FLASH/SPEAKER UNIT
1. Remove the three screws.
2. Remove the SUB FRAME and the MINI FRAME as a single part, and do not remove them separately.
CAUTION
When the FLASH/SPEAKER UNIT is going to be removed without removing the MAIN PCB ASS’Y as
described in chapter 2.2.8, remove only the MINI FRAME and proceed the disassembly work starting from
step (1)-3.
3. Remove the three cables.
4. Remove the two screws.
5. Remove the MINI FRAME.
6. Remove the SUB FRAME.
7. Remove the cable.
8. Remove the two screws.
9. Remove the FLASH/SPEAKER UNIT in the direction of the arrow.
p
p
(1)-1
(1)-1
(1)-5
p
p
(1)-8
FLASH/SPEAKER UNIT
Precaution when installing the FLASH/SPEAKER UNIT
When installing the FLASH/SPEAKER
UNIT, route the cable on the back of
the P.C.B. as shown in the illustration.
(1)-9
(1)-8
(1)-7
(1)-3
SUB FRAME
MINI FRAME