Canon PowerShot G15 User Manual Download Page 96

Page: 96 / 316

Specific Scenes

Still Images

Movies

Shoot under water (Underwater)

Natural-colored shots of sea life and

underwater scenery, when you use an

optional waterproof case (

237).

This mode can correct white balance and

match the effect of using a commercially

available color-compensating filter

(

135).

Still Images

Movies

Shoot with snowy backgrounds

(Snow)

Bright, natural-colored shots of people

against snowy backgrounds.

Still Images

Movies

Shoot fireworks (Fireworks)

Vivid shots of fireworks.

•

Subjects appear larger in [ ] mode compared to other modes.

•

In [ ] and [

] modes, shots may look grainy because the ISO

speed (

129) is increased to suit the shooting conditions.

•

Because the camera will shoot continuously in [ ] mode, hold it

steady while shooting.

•

In [ ] mode, excessive camera shake or certain shooting

conditions may prevent you from obtaining the desired results.

•

In [

] mode, mount the camera on a tripod or take other

measures to keep it still and prevent camera shake. Additionally,

you should set [IS Mode] to [Off] when using a tripod or other

means to hold the camera still (

160).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 96 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: