Canon PowerShot G15 User Manual Download Page 89

Page: 89 / 316

Customizing Camera Operation

Customize shooting functions on the [

] tab of the menu as follows.

For instructions on menu functions, see “

Menu” (

48).

Still Images

Deactivating the AF Assist Beam

You can deactivate the lamp that normally lights up to help you focus when

you press the shutter button halfway in low-light conditions.

Configure the setting.

Press the <

> button, choose

[AF-assist Beam] on the [

] tab, and

then choose [Off] (

48).

To restore the original setting, repeat this

process but choose [On].

Still Images

Deactivating the Red-Eye Reduction Lamp

You can deactivate the red-eye reduction lamp that lights up to reduce red-

eye when the flash is used in low-light shots.

Access the [Built-in Flash

Settings] screen.

Press the <

> button, choose [Flash

Control] on the [

] tab, and then press

the <

> button (

48).

Configure the setting.

Choose [Red-Eye Lamp], and then

choose [Off] (

48).

To restore the original setting, repeat this

process but choose [On].

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands