Canon PowerShot G15 Page 86 User Manual Download

Page: 86 / 316

Helpful Shooting Features

Still Images

Movies

Using the Dual Axis Electronic Level

An electronic level can be displayed as a guideline to ensure the camera is

level from front to back and left to right.

Display the electronic level.

Press the <

> button several times to

display the electronic level.

Back or

Forward

Left or Right

Straighten the camera.

If the camera is tilted, move it so that the

red line changes to green.

•

If the electronic level is not displayed in step 1, press the <

> button,

and on the [

] tab, choose [Custom Display]. Add a [

] to [

] or [

] to

choose the electronic level.

•

The electronic level is not displayed during movie recording.

•

If you hold the camera vertically, the orientation of the electronic level will be

updated automatically to match the camera orientation.

•

Calibrate the electronic level if it seems ineffective in helping you level the

camera (

228).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands