Canon PowerShot G15 User Manual Download Page 68

Page: 68 / 316

Common, Convenient Features

Still Images

Choosing Subjects to Focus On (Tracking AF)

Shoot after choosing a subject to focus on as follows.

Specify Tracking AF.

Press the <

> button.

[ ] is displayed in the center of the

screen.

Choose a subject to focus on.

Aim the camera so that [ ] is on the

desired subject, and then press the

shutter button halfway.

A blue frame is displayed, and the

camera will keep the subject in focus and

image brightness adjusted (Servo AF).

Shoot.

Press the shutter button all the way down

to shoot.

Press the <

> button to cancel Tracking

AF.

•

Tracking may not be possible when subjects are too small or move too

rapidly, or when subject color or brightness matches that of the background

too closely.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands