Canon PowerShot G15 Page 65 User Manual Download

Page: 65 / 316

Common, Convenient Features

Once you start the self-timer, the lamp

will blink and the camera will play a self-

timer sound.

Two seconds before the shot, the blinking

and sound will speed up. (The lamp will

remain lit in case the flash fires.)

To cancel shooting after you have

triggered the self-timer, press the

> button.

To restore the original setting, choose [ ]

in step 1.

Still Images

Movies

Using the Self-Timer to Avoid Camera Shake

This option delays shutter release until about two seconds after you have

pressed the shutter button. If the camera is unsteady while you are pressing

the shutter button, it will not affect your shot.

Configure the setting.

Follow step 1 on

64 and choose

[

Once the setting is complete, [

[

] is

displayed.

Follow step 2 on

64 to shoot.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands