Canon PowerShot G15 User Manual Download Page 220

Page: 220 / 316

220

Adjusting Basic Camera Functions

Date and Time

Adjust the date and time as follows.

Access the [Date/Time] screen.

Choose [Date/Time], and then press the

> button.

Configure the setting.

Press the <

> buttons to choose an

option, and then adjust the setting, either

by pressing the <

> buttons or

turning the <

> dial.

World Clock

To ensure that your shots will have the correct local date and time when you

travel abroad, simply register the destination in advance and switch to that

time zone. This convenient feature eliminates the need to change the Date/

Time setting manually.

Before using the world clock, be sure to set the date and time and your

home time zone (“Setting the Date and Time” (

20)).

Specify your destination.

Choose [Time Zone], and then press the

> button.

Press the <

> buttons or turn the

> dial to choose [ World], and then

press the <

> button.

Press the <

> buttons or turn the

> dial to choose the destination.

To set daylight saving time (1 hour

ahead), press the <

> buttons to

choose [ ].

Press the <

> button.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 220 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: