Canon PowerShot G15 Page 22 User Manual Download

Page: 22 / 316

Initial Preparations

Changing the Date and Time

Adjust the date and time as follows.

Access the camera menu.

Press the <

> button.

Choose [Date/Time].

Move the zoom lever to choose the [

]

tab.

Press the <

> buttons or turn the

> dial to choose [Date/Time], and then

press the <

> button.

Change the date and time.

Follow step 2 on

21 to adjust the

settings.

Press the <

> button to close the

menu.

•

Date/time settings can be retained for about 3 weeks by the camera’s built-in

date/time battery (backup battery) after the battery pack is removed.

•

The date/time battery will be charged in about 4 hours once you insert a

charged battery or connect the camera to an AC adapter kit (sold separately,

235), even if the camera is left off.

•

Once the date/time battery is depleted, the [Date/Time] screen will be

displayed when you turn the camera on. Follow the steps on

20 to set

the date and time.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands