Canon PowerShot G15 Page 196 User Manual Download

Page: 196 / 316

196

Still Images

Movies

Erasing Images

You can choose and erase unneeded images one by one. Be careful when

erasing images, because they cannot be recovered. However, protected

images (

192) cannot be erased.

Choose an image to erase.

Press the <

> buttons or turn the

> dial to choose an image.

Erase the image.

Press the <

> button.

After [Erase?] is displayed, press the

> buttons or turn the <

> dial to

choose [Erase], and then press the <

button.

The current image is now erased.

To cancel erasure, press the <

buttons or turn the <

> dial to choose

[Cancel], and then press the <

button.

•

Pressing the <

> button while [

] images are displayed will give you

the option of choosing [Erase

], [Erase JPEG], or [Erase

+JPEG] for

deletion.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands