Canon PowerShot G15 Page 189 User Manual Download

Page: 189 / 316

189

Image Viewing Options

Still Images

Magnifying Images

Approximate Position of

Displayed Area

Magnify an image.

Moving the zoom lever toward <

> will

zoom in and magnify the image. You

can magnify images up to about 10x by

continuing to hold the zoom lever.

To zoom out, move the zoom lever

toward <

>. You can return to single-

image display by continuing to hold it.

Move the display position and

switch images as needed.

To move the display position, press the

> buttons.

To switch to other images while zoomed,

turn the <

> dial.

•

You can return to single-image display from magnified display by pressing

the <

> button.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands