Canon PowerShot G15 User Manual Download Page 180

Page: 180 / 316

180

Browsing and Filtering Images

Still Images

Movies

Navigating Through Images in an Index

By displaying multiple images in an index, you can quickly find the images

you are looking for.

Display images in an index.

Move the zoom lever toward <

> to

display images in an index. Moving the

lever again will increase the number of

images shown.

To display fewer images, move the zoom

lever toward <

>. Fewer images are

shown each time you move the lever.

Choose an image.

Turn the <

> dial to scroll through the

images.

Press the <

> buttons to

choose an image.

An orange frame is displayed around the

selected image.

Press the <

> button to view the

selected image in single-image display.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 180 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: