Canon PowerShot G15 User Manual Download Page 171

Page: 171 / 316

171

Customization for Shooting Styles

•

To edit saved settings (except their shooting mode), choose < >

or <

>, change the settings, and then repeat steps 2 – 3. These

setting details are not applied in other shooting modes.

•

To clear information you have saved to < > or <

> and restore default

values, turn the mode dial to < > or <

> and choose [Reset All]

(

231).

Still Images

Movies

Saving Commonly Used Shooting Menus

(My Menu)

Save up to five commonly used shooting menus as menus on the [ ] tab,

for instant access to all of these items from a single screen.

Access the setting screen.

Press the <

> button, choose [My

Menu settings] on the [ ] tab, and then

press the <

> button (

48).

Configure the setting.

Press the <

> buttons or turn the

> dial to choose [Select items], and

then press the <

> button.

Press the <

> buttons or turn the

> dial to choose menus to save (up to

five), and then press the <

> button.

[ ] is displayed.

To cancel saving, press the <

> button.

[ ] is no longer displayed.

Press the <

> button.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 171 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: