Canon PowerShot G15 User Manual Download Page 168

Page: 168 / 316

168

Customization for Shooting Styles

Still Images

Movies

Assigning Functions to the Front Dial and

Control Dial

Assign commonly used functions to the front dial and control dial, by

shooting mode.

Access the setting screen.

Press the <

> button, choose [Set

Func.] on the [

] tab, and then

press the <

> button (

48).

Configure the setting.

Press the <

> buttons to choose an

item.

To configure the settings, press the

> buttons, choose an item (either

press the <

> buttons

or turn the <

> dial), and then turn the

> dial to change the function.

Assignable Functions

Functions you can assign to the front dial and control dial vary depending

on shooting mode. On the setting screen, you can assign aspect ratio

switching (

80), i-Contrast (

132), white balance correction (

135),

or step zoom (

141) to modes indicated by in the following table.

Item

Shooting Mode

Front Dial 1

Front Dial 2

Control Dial

•

>: aperture value (

163); <

>: shutter speed (

162)

•

When multiple functions are assigned to the <

> dial, press the <

> button to

switch between them.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 168 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: