Canon PowerShot G15 User Manual Download Page 153

Page: 153 / 316

153

Shooting Range and Focusing

Still Images

Focus Bracketing (Focus-BKT Mode)

Three consecutive images are captured each time you shoot, with the

first one at the focal distance you set manually and the others at farther

and nearer focal positions determined by presets. The distance from your

specified focus can be set in three levels.

Choose [ ].

Press the <

> button, choose [ ]

in the menu, and then choose [ ]

(

47).

Configure the setting.

Press the <

> button, and then

adjust the setting by pressing the

> buttons or turning the <

> dial.

•

Focus bracketing is only available in [

] mode (

25, 55).

•

Continuous shooting (

139) is not available in this mode.

•

You can also access the setting screen in step 2 by choosing [

] in step 1

142 and pressing the <

> button.

•

Three shots are taken, regardless of any quantity specified in [

] (

66).

•

In [Blink Detection] mode (

88), this function is only available for the final

shot.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 153 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: