Canon PowerShot G15 Page 152 User Manual Download

Page: 152 / 316

152

Shooting Range and Focusing

Choose the face to focus on.

To switch the face frame [ ] to another

detected face, press the < > button.

After you have switched the face frame

to all detected faces, [Face Select : Off]

is displayed, and the specified AF frame

mode screen is displayed again.

Shoot.

Press the shutter button halfway. After the

camera focuses, [ ] changes to [ ].

Press the shutter button all the way down

to shoot.

Still Images

Movies

Shooting with the AF Lock

The focus can be locked. After you lock the focus, the focal position will not

change even when you release your finger from the shutter button.

Lock the focus.

With the shutter button pressed halfway,

press the <

> button.

The focus is now locked, and [

] and

the MF indicator are displayed.

To unlock the focus, once again hold the

shutter button halfway down and press

the <

> button.

Compose the shot and shoot.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands