Canon PowerShot G15 User Manual Download Page 138

Page: 138 / 316

138

Color and Continuous Shooting

•

White balance (

134) cannot be set in [ ] or [ ] modes.

•

With [ ] and [ ] modes, colors other than people’s skin tone

may be modified. These settings may not produce the expected

results with some skin tones.

Still Images

Movies

Custom Color

Choose the desired level of image contrast, sharpness, color saturation,

red, green, blue, and skin tones in a range of 1 – 5.

Access the setting screen.

Follow the steps on

137 to choose

[ ], and then press the <

> button.

Configure the setting.

Press the <

> buttons to choose

an option, and then specify the value by

pressing the <

> buttons or turning

the <

> dial.

For stronger/more intense effects (or

darker skin tones), adjust the value to

the right, and for weaker/lighter effects

(or lighter skin tones), adjust the value to

the left.

Press the <

> button to complete

the setting.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 138 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: